$340.00
For the long distance races or others when there would be a chance for rain Ferrari would use rubber boots to cover the distributors to keep the rain water out of the electrics. There are good photos of the T.R.s using these boots at Le Mans. Small Distributor Boots for the Front – Mounted Distributors
(Sold Individually)
Product Search: KIL-120A
All of the Italian sports racers used some type of hand-made aluminum mirrors. These are made from the pattern used on the mid-fifties Ferraris and Maseratis through the early 1960s. The correct Italian style mirrors can be distinguished by a little spring clip that is used to retain the glass. Sometimes they were painted but often they were left with a brushed aluminum finish. There are good photos of these mirrors on the 335S racers on pgs. 92 and 94 of the beautiful book A Champion’s View by Phil Hill. 1950s Style Racing Mirror.
Product Search: KIL-98
Read more
The early inside plug cars often used drip trays under the carburetors to keep any leaked gasoline away from the center of the engine blcok and the spark plugs. These drip trays were connected by short pieces of clear plastic tubing to an aluminum tubing manifold then to a longer piece of clear hose which led down the rear of the engine around the bell housing. These pieces are made by the original craftsmen in Italy and are perfect. There is a good photograph of one of the drip trays being fitted to an engine in the Ferrari factory on page 61 of the wonderful book Modena Racing Memories. Three Drip Trays and the Aluminum Tubing Manifold.
(Sold as pictured)
Product Search: KIL-97
Add to cart
I looked and looked for correct Pirelli fan belts for my old 250 Cabriolet with no luck. Finally I made a silk screen jig and began silk screening modern belts with the correct old – style Pirelli information. My silk screen and jig can only do the long belts for the outside plug engines that had generators, and the very short belts that were used on the front mounted generators on inside plug 250 engines.Long Belts for the 250 Outside Plug Engines with Generators
(Sold Individually)
Product Search: KIL-115B
Add to cart
Ferrari used the Button type grease fittings on all of the cars prior to the 275 series which began using the more familiar “Allamite” type. On the 250 series cars the tie rod ends used the “Allamite” type grease fittings. This pull-on type adapter is appropriate for other Italian, French and English cars using the button type grease fittings with the head dimensions of 15mm across the flats and 2mm thick. Pull-On Type Grease Gun Adapter
(Sold Individually)
Product Search: KIL-112
Add to cart
