96A-2 | Stamped Diament with the manufacturer’s logo

$35.00

Out of stock

SKU: KIL-96A-2 Categories: ,

Description

The 250 series cars built by PininFarina often used a special type of hose clamps on the large air duct hoses. These clamps are called “Diament” based on the manufacturer’s logo which is sometimes found on the body of the clamp. These clamps are very similar to the normal Copiglia clamps but they have a special body with a small set screw which is used to secure the strap once the clamp is tightened. I have seen these on P.F. Coupes, Series 1 Spyders, G.T. E.s and the Cabriolets. Stamped Diament with the manufacturer’s logo.

 

 

Product Search: KIL-96A-2

Related products

  • 115A | Short fan belt for 250 inside plug engines

    $30.00     Add to cart

    115A | Short fan belt for 250 inside plug engines

     $30.00

    I looked and looked for correct Pirelli fan belts for my old 250 Cabriolet with no luck. Finally I made a silk screen jig and began silk screening modern belts with the correct old – style Pirelli information. My silk screen and jig can only do the long belts for the outside plug engines that had generators, and the very short belts that were used on the front mounted generators on inside plug 250 engines. Short Fan Belt for 250 Inside Plug Engines

     

    (Sold Individually)

     

     

    Product Search: KIL-115A

    Add to cart

  • 114 | I-Joint grease extension

    $60.00     Add to cart

    114 | I-Joint grease extension

     $60.00

    The round rubber Saga universal joints have a spherical ball and socket, made of steel, in the center of the “Donut”. Because of the structure of the metal frame it is not possible to lubricate this ball and socket without some special equipment. This short steel extension was provided in some of the late tool bags. It is not shown in the 250 tool bag photos or drawings but it is necessary for these cars. I suppose that a factory-trained mechanic would have this tool and would be the person doing this type of work. This tool is 60mm long and has 8×1 threads at each end. U-Joint Grease Extension.

    (Sold Individually)

     

     

    Product Search: KIL-114

    Add to cart

  • 121A | Black – painted center – pull exhaust hangers

    $38.00     Add to cart

    121A | Black – painted center – pull exhaust hangers

     $38.00

    The very early Ferraris had the exhaust system mounted solidly to the chassis. They later changed to a type of hanger with metal ends and flexible center section made of belting or truck tire sidewalls. The early ones were what are called the “Center-pull” design. In this configuration the four steel components are all the same design. These end pieces are all bent so that the force goes through the center of the assembly. This design was originally painted black until the mid 1950s when a change was made toa cadmium finish. Later, about 1962 during the run of the 250 GTEs the hanger design was changed to the more common “Side-Pull” arrangement. Black-Painted Center-Pull Exhaust Hangers…(24 to 28 per car)

     

    (Sold Individually)

     

     

    Product Search: KIL-121A

    Add to cart

  • 121B | Cadmium-plated center – pull exhaust hangers

    $35.00     Add to cart

    121B | Cadmium-plated center – pull exhaust hangers

     $35.00

    The very early Ferraris had the exhaust system mounted solidly to the chassis. They later changed to a type of hanger with metal ends and flexible center section made of belting or truck tire sidewalls. The early ones were what are called the “Center-pull” design. In this configuration the four steel components are all the same design. These end pieces are all bent so that the force goes through the center of the assembly. This design was originally painted black until the mid 1950s when a change was made toa cadmium finish. Later, about 1962 during the run of the 250 GTEs the hanger design was changed to the more common “Side-Pull” arrangement. Cadmium – Plated Center – Pull Exhaust Hangers

     

    (Sold Individually)

     

     

    Product Search: KIL-121B

    Add to cart